You will also need to follow the methods in the order they are posted to minimize your debug time on the Windows 10 device. First of all, before you begin, you will need a DVD or an external memory like a USB device with Windows 10 on it to be able to boot from it. Also make sure the CD/DVD you have with Windows 10 is not damaged in any way thus preventing any errors in the boot process. No Boot Device Available message can be a big problem, and in this article we’re going to show you how to fix the following issues:

No boot device found Windows 10 Dell – This problem can appear on almost any Windows device, and many Dell users reported this problem on their PCs. No boot device found press any key to reboot the machine – Sometimes this error message will ask you to press any key to restart your PC. Unfortunately, even after you restart your PC you won’t be able to access Windows. No Boot Device Available USB, UEFI – Sometimes this problem can occur if you’re using UEFI. To fix this issue, you just need to change your UEFI configuration. No boot device has been detected – This is a variation of this problem and it can appear if your hardware is faulty. In addition, this issue can appear if your hard drive isn’t properly connected. Keyboard failure No Boot Device Available – According to users, sometimes this problem can be caused by your keyboard. To fix the issue, you might want to try disconnecting or replacing your keyboard. No Boot Device Available current boot mode is set to BIOS – This is another relatively common problem. If you’re getting this error message, you just need to switch from BIOS to UEFI and the issue should be resolved. No boot device connected, found, selected, detected – This is a standard variation of this problem, and many users reported that their boot device isn’t connected or found. This can be a big problem, but you should be able to fix it using one of our solutions. No boot device SSD – Many users reported that this problem started appearing after using an SSD. This isn’t a serious problem and you should be able to fix it by changing your BIOS settings.

On a side note, this specific error often occurs shortly after migrating from Windows 7 to Windows 10. But it can also occur after installing the latest Windows 10 updates. Judging by the number of reports we’ve come across, Dell computers are particularly affected by this issue. You can use the troubleshooting guide below both for Dell computers, as well as other computer brands.

No boot device found: How to fix this error

Solution 1 – Run Automatic repair

Solution 2 – Run the troubleshooter

Several users claim that you can the problem with No boot device available message simply by running the troubleshooter. If you can’t access Windows normally, you might want to try this solution from Safe Mode. Keep in mind that this isn’t a universal solution, so it might not work for you.

Solution 3 – Run SFC scan

If you’re having trouble accessing Command Prompt as an admin, then you better take a closer look on this guide. If you can’t access your Windows 10 at all, you can run Command Prompt from Advanced Boot Menu. To do that, simply restart your PC couple of times. Now select Troubleshoot > Advanced options > Command Prompt. When Command Prompt starts, you need to run the following commands:

sfc /scannow /offbootdir=c: /offwindir=c:windows chkdsk c: /r

chkdsk is giving you headaches? Check out this quick guide to any issues with it. If those two commands can’t fix the problem, you might have to use DISM scan instead. To do that, just run this DISM /Online /Cleanup-Image /RestoreHealth command. If the previous command doesn’t work, try using the following commands instead:

Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess

These commands will check for file corruption and fix any corrupted files on your hard drive that might prevent Windows from booting. Keep in mind that this isn’t a universal solution, so it might not work if the problem is caused by your hardware.

Solution 4 – Make sure you’re using UEFI

Many users reported No Boot Device Available message after a BIOS update. If you’re getting this error message, the problem might be related to your BIOS. To fix the issue, you need to switch from BIOS to UEFI. This is a simple process, and in order to do it, you just have to enter BIOS and change a single setting. Since there are many different versions of BIOS, we strongly advise you to check your motherboard manual and see how to switch permanently to UEFI. After doing that, the error message should be resolved and your PC should start working again. SPONSORED

Solution 5 – Check for loose cables

Sometimes you might get No Boot Device Available message if your components aren’t connected properly. To fix this problem, you need to power down your PC, disconnect it from power outlet and open your computer case. After doing that, be sure to check all SATA cables and make sure that they are tightly connected to your motherboard and to your hard drive. Several users reported that this problem occurred because their SATA cables weren’t firmly connected to their motherboard. After connecting everything properly, the issue should be completely resolved.

Solution 6 – Disconnect USB peripherals

Users reported that No Boot Device Available message can be caused by your USB devices. According to users, they were unable to boot to their PC, but after disconnecting their USB devices, the issue was resolved. Several users reported that their USB keyboard and mouse were the problem, so be sure to disconnect them as well. If your mouse or keyboard are the cause of the problem, try replacing them and check if that solves the issue.

Solution 7 – Set your hard drive as first boot device

According to users No Boot Device Available message can appear if your hard drive isn’t set as the first boot device. However, you can easily fix this issue simply by going to Boot section in BIOS. From there you need to find First Boot Device setting and set it to your hard drive. After doing that, the issue should be resolved. Several users are recommending to turn off Secure Boot feature, so you might want to do that as well. You can also try changing the Boot Mode from UEFI to Legacy to see if it helps. If you want to know how to enable Legacy Boot on Windows 10, take a look at this nifty guide that will help you do it. After making these changes, the issue should be completely resolved. To see how to find and change these settings, we strongly suggest that you check your motherboard manual for detailed instructions.

Solution 8 – Fix your MBR

Sometimes damaged MBR can cause No Boot Device Available message to appear. To fix the issue, you need to start Command Prompt like we showed you in Solution 3 and run the following commands:

bootrec.exe /FixMbr bootrec.exe /FixBoot bootrec.exe /RebuildBcd

If those commands don’t work, try using these commands instead:

bcdedit /export C:BCD_Backup c: cd boot attrib bcd -s -h -r ren c:bootbcd bcd.old bootrec /RebuildBcd

After running these commands, check if your problem is resolved. The eight methods above are all but sufficient to get your No boot device available message out of the Windows 10 system. Keep in mind though that you need to follow them in the order they are presented and also be sure not to skip any of the steps presented. If you have any more questions, don’t hesitate to leave them in the comments section below and we’ll be sure to take a look.

Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ