Users report that they are unable to share files between network computers, and some are even unable to access the internet. As you can see, this problem can cause a lot of inconveniences, but there are a few solutions available.

How can I fix Network Protocol missing error in Windows 10?

Besides the Network protocol missing error, there are a few other issues that could be caused by the same culprits. For example:

Windows sockets registry entries required for network connectivity are missing One or more network protocols are missing on this computer Could not add the requested feature Network protocols missing error Windows 10 One or more network protocols are missing on this computer WiFi

So, no matter the error code, you can apply the solutions from below, and (hopefully), you’ll solve the problem. Table of contents:

Temporarily disable antivirus Restore network protocols to default settings Disable NetBIOS Use Command Prompt Use Command Prompt and sc.exe Import Winsock keys from a different computer Restore your router and check the cable Use Network Troubleshooter Restore network components Restore network components Update BIOS

Solution 1 – Temporarily disable your antivirus software

Although it’s not a good idea to disable your antivirus software, some users report that after disabling Kaspersky Internet Security their issues have been resolved. So if you are using Kaspersky Internet Security, you might consider disabling it temporarily or switching to a different antivirus software. In addition, reinstalling antivirus software could also be helpful. Don’t expose yourself to unnecessary risks. Find out why Windows Defender is the only malware barrier you need!

Solution 2 – Restore network protocols to default settings

Another thing we’re going to try is resetting network protocols to default settings. We’re going to do this by resetting the TCP/IP stack. In case you’re not sure how to do that, just follow the instructions: If you’re having trouble accessing Command Prompt as an admin, then you better take a closer look at this guide.

Solution 3 – Disable NetBIOS

Some users also claim that this issue is resolved by using obtaining IP address automatically instead of using a static IP. To change this setting just follow the first three steps from this solution. As soon as you open IPv4(TCP/IP) Properties you should see the option that allows you select whether you want to use static IP address or to obtain one automatically. You can’t open Control Panel? Take a look at this step-by-step guide to find a solution. Can’t access IPv4 proprieties on Windows 10? Check out this guide and solve the problem in no time.

Solution 4 – Use Command Prompt

In addition, some users suggest using the netsh int ipv4 install command. Just start the Command Prompt as administrator like in Step 1, type netsh int ipv4 install into Command Prompt and press Enter to run it. After that, restart your computer and see if the issue is fixed.

Solution 5 – Use Command Prompt and sc.exe

This is a temporary solution, and you might have to revert the changes after a new Windows 10 update, if the problems start occurring. Here’s what you need to do: After entering these lines into Command Prompt, the issue should be resolved. If you start to have troubles after a Windows 10 update, you might want to restore the default settings. To do so, follow these instructions:

Solution 6 – Import Winsock keys from a different computer

We have to mention that this is an advanced solution, and if you’re not careful, or you don’t know how to modify a registry, don’t do it, because you can cause damage to your operating system. However, should you decide to proceed, you’ll need a different computer that doesn’t have problems with Network Protocols. You don’t necessarily have to use a Windows 10 computer. Here’s what you need to do: SPONSORED If you can’t edit your Windows 10’s registry, read this handy guide and find the quickest solutions to the issue. Can’t access the Registry Editor? Things aren’t as scary as they seem. Check out this guide and solve the issue quickly.

Solution 7 – Restore your router and check the cable

If none of the steps above managed to solve the problem, try resetting your router. Turn it off first, and then switch it back on after a few minutes. Additionally, you can use a different LAN cable to connect your computer to the router. And finally, reset your router to factory settings by pressing the small button on the back (actually, the position of the reset button depends on your router).

Solution 8 – Reinstall your Network Adapter

After completing the steps from above, you might as well want to reinstall your Network Adapters. Here’s how to do that: Windows can’t automatically find a driver for your network adapter? Count on us to solve the problem.

Solution 9 – Use Network Troubleshooter

If you’re running Windows 10 Creators Update (or later), you have a new troubleshooting tool, provided by Microsoft. This troubleshooting tool is designed to deal with various issues within the Windows operating system, including various network errors. If you don’t know how to run this troubleshooter, just follow these instructions: If the problem remains unresolved, you can try with the Network Adapter option, instead of Internet Connections. If you’re having trouble opening the Setting app, take a look at this article to solve the issue. If the Troubleshooter stops before completing the process, fix it with the help of this complete guide.

Solution 10 – Restore network components

You can also try with resetting the following network components: If you can’t flush the DNS, take a look at this step-by-step guide to solve the problem quickly.

Solution 11 – Update BIOS

And finally, some users reported that updating BIOS actually solves the problem. But before you go all in and flash your BIOS, we have to warn you that it could be a risky action, as one wrong move can render your motherboard unusable. Only do it if you know what you’re doing. Updating BIOS seems scary? Make things way easier with the help of this handy guide. That’s about it, at least one of these solutions should solve your problem with Network Protocols in Windows 10. If you have any questions, or comments, just reach for the comment section below.

Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ