When it occurs, your PC behaves weirdly and may stubbornly refuse to recover its correct boot settings even after trying common solutions like restarting your computer. At this point, you are faced with a splash screen at boot and then a black screen and related troubles and the computer won’t start. The only way out for you is to try out other options -and there are plenty of them. But just before we discuss them, let’s look at what triggers the irritating this version of system recovery options is not compatible problem…

What triggers this error?

Long story short, the error arises due to a faulty system repair setup.

SOLVED: This Version Of System Recovery Options Is Not Compatible

There are a number of ways you can troubleshoot this recovery hurdle.

Method 1: Modify Your Boot Settings

For PCs with more than one hard disk, you can try to change your BIOS settings as follows: Option 1: Disable all other disks but your Windows system disc If you disable your second hard disk (and every other extra disk) in BIOS and leave the windows system disc (primary hard drive) only when recovering, the compatibility hiccup may not occur. This should then allow the Windows 7 recovery to proceed normally. — RELATED: 7 ways to fix Windows Error Recovery on laptops Option 2:  Set the System Disk to be accessed from a lower channel Alternatively, you may have to look into which ports the various drives – system, DVD/Blue-ray drives, and secondary disks are installed on the motherboard. You then rewire the system drive into a lower channel/slot, for example, SATA slot #0(channel 0). Connect the rest into the other slots, for instance, the Blue-ray can go SATA slot #1, RAID on SATA slots #2, and so on. In addition, switch boot sequences and ensure that the system disk will be number 1 in the system boot priority list. Lastly, reboot from your recovery disk.

Method 2: Disconnect and Reconnect The Drives

If your Windows repair option won’t work, try disconnecting then reconnecting your hard drives including any existing RAID disks. SPONSORED You would need to access their ports by removing the system case. Remember to unplug the PC from the power source before opening the case. Retry the recovery soon after reconnecting the power cables and see if this will fix the this version of system recovery options is not compatible problem. — RELATED: 5 best external hard drive recovery software to use in 2019

Method 3: Disable UEFI

UEFI Secure Boot helps to ensure that your computer boots using trusted firmware only. But it occasionally triggers the this version of system recovery options is not compatible issue. Disabling Secure Boot can hence remove the unwelcome setback. Steps: If all is well, it will re-launch recovery and run the steps to completion.

Method 3: Create a Fresh Recovery Disk

It can be that you’re attempting to recover your Windows installation using an outdated Windows 7 recovery DVD. This happens especially in newer machines which come with UEFI enabled instead of the conventional BIOS firmware interface. Steps:

Method 4: Boot in UEFI Mode/ legacy BIOS-compatibility

Another way to beat this error is by booting in UEFI mode. That’s because booting into this mode when recovering Windows eliminates any compatibility conflicts from your USB/DVD. Steps: MORE GUIDES JUST FOR YOU:

How to fix corrupt files after using file recovery options Recovery Boot Configuration Data File Missing [Quick Fix] Fix: ‘Insert your Windows installation or recovery media’ error

SPONSORED Name * Email * Commenting as . Not you? Save information for future comments
Comment

Δ